.
Method 6 Source Sampling Kit for VersaCase4 (SK-606)
|
|
The
Method 6 Source Sampling
Kit for VersaCase4 (SK-606) features our new miniature VersaCase, glass
lined probe assembly, midget glassware set, sample tray, nontoxic ice
packs, connecting accessories and the umbilical cable for connection to
the Model 623 source sampler console. |
|
| SK-606
includes: |
| Qty |
Part
# |
Description |
| 1 |
VSB4 |
VersaCase
4 |
| 1 |
PC-3/4 |
SS
Hinged Probe Clamp (for 3/4” OD probes) |
| 1 |
MGN-CGS |
Midget
Glassware Set |
| 1 |
MGA-101 |
Outlet
with TC Well & 12/5 Socket |
| 1 |
MSB-1 |
Insulated
Sample Tray with Drain Valve |
| 2 |
ICE-20 |
Ice
Pack, Small |
| 1 |
MPH-36 |
36”
Heated Probe Assembly, 120V |
| 3 |
MPL-36G2 |
36”
Pyrex Liner (8mm) with Glass Cup (no ball joint) |
| 1 |
VU-30 |
30
ft. VersaCase Umbilical Cable |
| 3 |
MGA-12B5TG |
Glass
Adapter, 12/5 Ball to #15 Threads |
|
| Insulated Sample Tray with
Drain Valve (MSB-1) |
MSB-1
shown with Midget Glassware Set |
The Insulated Sample Tray with Drain Valve (MSB-1) can
hold a Midget Glassware Set and two nontoxic ice packs. The ice packs
allow quicker turn around between runs. At the end of the run simply
remove the ice packs and drain the water before purging. |
| Midget Glassware Set
(MGN-CGS) |
| Qty |
Part# |
Description |
| 3 |
MGN-1A |
Midget
Impinger (plain stem) |
| 1 |
MGN-1AO |
Midget
Impinger (orifice stem) |
| 3 |
MGN-2 |
Midget
U-Tubes |
| 1 |
MGN-6 |
L-Connector
with 12/5 Sockets |
| 10 |
BS12 |
12/5 Ball Joint Pinch
Clamp
|
| Features
unground 12/5 ball joints with o-ring groove. |
|
Method 26 Extension Kit for
VersaCase4 (SK-626)
The Apex Instruments Method 6 and Method 26 Sampling Kits are normally
used in conjunction with the Model 623 source sampler console or one of
our alternative metering devices. The midget impingers can be used for
many different methods including NIOSH and OSHA methods. The Method 6
Sampling Kit (SK-606) can be modified for US EPA Method 26 with the
addition of the SK-626 Kit. |
 |
The Method 26 Extension Kit for VersaCase4 (SK-626) is
required for modifying the Method 6 Source Sampling Kit (SK-606). The
sample is passed through a pre-purged heated probe and filter into
dilute sulfuric acid and dilute sodium hydroxide solutions which
collect the gaseous hydrogen halides and halogens, respectively. The
filter collects particulate matter including halide salts but is not
routinely recovered and analyzed. The separate solutions are analyzed
by ion chromatography. |
 |
| SK-626 Includes: |
| (Use
in addition to SK-606 Method 6 Kit) |
| Qty |
Part
# |
Description |
| 1 |
PC-3/4E |
Extended
VersaCase Probe Clamp, Holds MFH-25CA, 120V |
| 1 |
MFH-25CA |
Heated
Filter Assembly with TFA-25B |
| 1 |
TF1165 |
TFE
Filter Membrane, 25mm, 30-60 Micron, 10/pack |
| 1 |
MGN-12B4 |
Glass
Adapter, #12 Ball to 1/4” Tube, Unground |
| 3 |
MPL-36G5 |
36”
Pyrex Liner, 6mm OD (1/4”) |
| 1 |
MVH-1 |
Heater
Assembly for 3-way Glass Valve, 120V |
| 1 |
MGN-1AK |
Midget
Impinger, Knockout, Unground |
| 1 |
MGN-1A |
Midget
Impinger, Plain Stem, Unground |
| 1 |
MGN-3SB |
Midget 3-way Valve,
Sockets Inlet & Outlet, Ball Purge
|
|
Method 26 Accessories
|
MVH-1
shown with valve |
| Part # |
Description |
| MVH-1 |
3-way Valve Heater, Aluminum Body with 30W Heater
and TC |
| MH-30 |
Replacement 30watt/120V Heater for MVH-1 (add
suffix V for 240V) |
| MGN-3SB |
Glass 3-way Valve with 12/5 Unground Socket Joints
Inlet and Outlet, Ball Joint Purge |
| MFH-25CA |
Heated Filter Assembly with Clamp (MFH-25C), 25mm
Filter Body (TFA-25B) and Heater (MH-50) |
|
MFH-25CA |
| TFA-25B |
25mm TFE Filter Replacement Body Only with
1/4” Tube Union, No Clamp |
| MH-50 |
Firerod Heater Sub-Assembly with Power Cord and
TC, 50W, 120V, for MFH-25 Filter Clamp |
| TF1165 |
TFE Membrane, 25mm, 30-60 Micron, 10/pack |
| PC-3/4E |
Extended 3/4” Probe Clamp (accepts
MFH-25CA) |
| MGN-12B4 |
Glass
Ball Adapter, Unground 12/5 Ball to 1/4” Tube Stub, O-ring |
|
